Specialists
Circle Auto Repair specializes in repair and maintenance of all makes and models of vehicles. We use the latest in computerized diagnostic equipment to provide the highest quality service possible.
Circle Auto Repair specializes in repair and maintenance of all makes and models of vehicles. We use the latest in computerized diagnostic equipment to provide the highest quality service possible.
Circle Auto Repair does state inspections for safety and emissions.
Recommended once a year. Set tire pressure; Inspect all steering and suspension components for wear; Set front toe-in, caster camber and rear toe-in.
Recommended every 16k miles. Rotate and balance all four tires. This service prolongs the life of your tires.
Remove or replace pads and shoes, resurface rotors and drums, inspect brake lines and components. Test parking brake.
Recommended every 30k miles. Flush old fluid; inspect resevoir and cap; inspect lines and fittings; install new fluid. NOTE: Add this service to the complete brake job service for a small additional cost.
Check all hoses and belts; pressure test system; check heater defroster and cooling fan operation; flush and recycle antifreeze; check coolant mixture to 50/50; insure proper pH balance; check for leaks; road test vehicle.
A/C performance test; check system pressures; check condenser and radiator cooling fan operation; inspect all A/C components for wear, leaks and proper operation. Recharge with up to 3 lbs of 134A Freon-A/C oil extra.
Replace spark plugs 4 cylinder vehicle. Check for engine faults, code and check idle timing specifications.
Recommended every 30k miles. Add Flushing cleaner to transmission; hook up flushing machine; completely flush all transmission components; replace all transmission fluid; check for leaks; inspect detent cable and all linkage-adjust as necessary; road test vehicle.
Recommended every 30k miles. This service helps reduce emissions plus improve drivability and fuel mileage. Clean throttle nody area; use induction system cleaner to clean intake valves; install fuel additive in tank to clean fuel injection system and remove carbon.
Complete power steering fluid flush. Inspect all components for wear, leaks and proper operation. Fortify fluid with power steering conditioner.
Recommended every 3k miles. Drain old oil; replace oil and filter; top off fluid levels; adjust tire pressure. NOTE: synthetic lubricants extra.